Products
Found 80 Results
Page 3 of 8
Page 3 of 8
Page 3 of 8
PS 1201
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 1,6 | ¡ | 78 Rockwe | 20 | Crystal | Extrusion, heat shrinkable | Ineos Styrolution |
February 27, 2020
PS 3601, (antes PST 145D)
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 14 | 1,05 | 74 Rockwe | 20 | Crystal | Injection | Ineos Styrolution |
LUR.S778T ISO
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 6 | 1,07 | 20 | General Purpose | Injection | Ineos Styrolution |
LUR. 777K ISO
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 10 | 1,08 | 17 | General Purpose | Injection | Ineos Styrolution |
LUR 368R
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 10 | 1,08 | 15 | Crystal | Extrusion and Injection | Ineos Styrolution |
PC200I001
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 35 | 0,901 | 83 (escala R) | 1,3 | Injection | PRIXENE |
PC350I00I
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 35 | 0,901 | 83 (escala R) | 1,3 | Injection | PRIXENE |
PC350I00C
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 35 | 0,901 | 87 (escala R) | 1,1 | Injection | PRIXENE |
PC120I00C
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 12 | 0,9 | 84 (escala R) | 1,2 | Injection | PRIXENE |
PH120I04
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 12 | 0,905 | 109 (escala R) | 0,5 | Injection | PRIXENE |
Page 3 of 8
“Your best option in the supply of thermoplastic resins”
FOLLOW US IN SOCIAL MEDIA
Home