Products
Found 80 Results
Page 2 of 8
Page 2 of 8
Page 2 of 8
EC/196-003
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 1.33+- 0.02 ( grav espec) | D 779 +/-2 | 3,33 | Extrusion | PRIXENE |
February 27, 2020
ZC7/055L-043
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 1.32+- 0.02 ( grav espec) | D 77 +/-2 | 3,33 | 6559 resist. Tensión | Extrusion | PRIXENE |
ZC7/060L-043
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 1.32+- 0.02 ( grav espec) | D 77 +/-2 | 5,41 | 6273 resist. Tensión | Extrusion | PRIXENE |
TER HI 10 (copia)
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| Wankai |
TER HI 10
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 8 | 1,03 | 36 | General Purpose | Extrusion and Injection | Ineos Styrolution |
TER GP 22
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 19 | 1,04 | 26 | General Purpose | Injection | Ineos Styrolution |
TER GP 35
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 34 | 1,04 | 22 | General Purpose | Injection | Ineos Styrolution |
STYROLUX 684D
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 11 | 1,01 | 40 | Crystal | Exreusion, Injection, thermoforming, puff | Ineos Styrolution |
STYROLUX 656C
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 16 | 1,02 | 35 | Crystal | Extrusion ,Injection, heat shrinkable, blow | Ineos Styrolution |
PS 2610, (antes PST 166H)
| MELT INDEX (g/10 min) | DENSITY (g/cm*3) | VISCOSITY (ml/g) | HARDNESS | IMPACT (KJ/m) | COMMENTS | PROCESS | SUPPLIER |
| 3,6 | 75 Rockwe | 20 | Crystal | Extrusion and injection | Ineos Styrolution |
Page 2 of 8
“Your best option in the supply of thermoplastic resins”
FOLLOW US IN SOCIAL MEDIA
Home
Certified Company
NMX-CC-9001-IMNC-2015
No.: ECMX-M-1102 / 15